Tidy work there Tom.
I will be doing something similar to my shed in next couple of weeks.
Is that T&G your using inside ??
What sort of price and where if you dont mind me asking ??
Thanks
Kris
Why "MUST" it?
Because that quote was taken from the manufactures instructions. well not all of it but here it is taken from the manufacturers instructions.
Undertile heating must be wired via an RCD. You must install a dedicated
RCD, if one is not already present. You may wish to use a...
What type of underfloor system is it??? Matt or the cable type ??
What was your sub floor preperation??
What size kit was it??
Was it wired via an fused spur?? The system MUST incorporate A
30Ma RCD either at the distribution board or by a dedicated RCD supplied
from a fused spur...
Here you go mate. Screwfix do them
http://www.screwfix.com/prods/14770/Electrical-Supplies/RCDs/Powerbreaker-13A-RCD-FCU
http://www.screwfix.com/prods/83049/Electrical-Supplies/RCDs/Volex-13A-RCD-FCU
I got all mine from Tile Giant matey.
400mm x 400mm travertines at £2.99 each as they are on special offer at
the moment
They look lovely on the floor and walls. Thing is you will have to get
yourself a wet wheel cutter to cut them as they are 12mm thick but they
do cut with ease...
Now Now dont get your G-String in a twist Mr Keyboard Warrior.
It cost me alot more than that, only put £100 cos i knew you would bite
HOOK - LINE - AND SINKER
HAPPY NEW YEAR :twisted: :twisted: :twisted:
Topic Closed
All sorted now :D :D :D :D
Sparky came round this morning and completed all works. He said i hadnt
done a bad job and was on the right track but just needed a few tweeks
to make it spot on.
He never moved the fan switch in the end, all he did was fit another back
box inline with...
Cheers matey :)
I will cut another hole in line with the studs and line up with the
existing switch with the cables or at least within 15mm of them.
It will be easier than re routing them as that was a ball ache.
cheers
Kris
Mathew,
Many thanks for your input mate and bringing me to light on the
safe zone matter.
Had a good look at the wiki and yep i was well out the safe zone until i
remembered that i have a fan switch on that wall in close proximity of the
cables so went up to bathroom and took some...
Right, i removed the plasterboard in corner, opposite to switch in other
room and located ring main and back box to socket
Is there anything stopping me from spurring from this socket using 2.5mm
T&E through battens and clipped, up through conduit with cold cables
and into loft to the...