Recent content by lloyds999

ok muggles, point taken, thanks for the reply anyway

I've got a Potterton Profile 50 , about 12 years old, in good woring order. Can anyone guide me on how to get to the burners to clean them (in the hope of better efficiency). I could just get my tools out and strip it down but would sooner work under guidance. Thanks Gerry

Message understood, thanks for your time & info Regards, Gerry

Also Kev... I don't want to over-ride the timeclock I just want to shut the heating down when temperature is reached.

Hi Kev' Ref' "l and swl" ....is that a lower-case "L" or a number one ? Are these terminals marked as this on the boiler pcb? Thanks. Gerry

sorry kev, its the Profile

I've got a Potterton 80e (about 10 years old) with all TRV's and a Honeywell HW & CH timeclock. I want to fit a Honeywell CMT927 wireless roomstat as well. Does anyone know the boiler connections please? Thanks Gerry

I've got a SIME Super 90 boiler in my workshop that we turn off Friday evenings and turn on Monday mornings to save wasting gas over the weekend. I want to fit a wireless timeclock to the system so that we have heat when we open on Monday mornings without running new cabling. Does anyone know a...

Hi Diyisfun, thanks for the info. Is the join a push-fit spade connection?

Thanks Stephen It's what I feared. I have to remove the built-in oven before getting access to the clips that hold the hob in the worktop to remove it. Thanks for the information

I have a Proline electric hob (from Comet, 18 months old) and one of the electric solid hotplates has packed up. I can find a suitable replacement on the internet but have never taken one of these apart before - is it a straight forward job replacing these? do I have to remove the hob from the...