Recent content by machine

Hi I need a little advice I have a indirect heating system and have removed all of the radiators and rehung new ones and now I want to remove all the pipe work and replace in ready for a new combi but still want to keep the old boiler heating water in the cylinder until it is replaced is it...

Hi I'm going to be removing all the radiators from my mums house to be replaced at some point she either has a direct or indirect system 30 years+(haven't checked yet) can I do this without affecting the hot water supply. thanks

Hi hope some one can help i've got a monobloc tap(ikea stockvick) in the kitchen that was leaking badly at the base so thought i would just replace it took it out went to buy a new one but when i went to fit it the hole in the kitchen top it was to big 44mm and not 35mm like it should be...

HI i have a wall 5m long that has 3 floor to ceiling cracks they are 1200mm apart so it looks like they are where the plaster boards meet the wall is original so will be mid 70s what can i do to repair the cracks i have tried to fill and paint over in the past but the cracks just come back...

Hi i had this boiler fitted in my house last year and the heating is set to 4 on the boiler but have just had this boiler fitted at my work as well and the plumber has set the heating to max on the boiler he said this is the best way to run it and will be the most efficient is this correct...

ok thanks so if i ran a cable from the juction box to the light connecting blue to the neutral and brown to the loop in the juction box then run a cable from the switch to the light connect the brown to the live then connect the blue from the switch to the brown from the juction box with a...

Hi i have just put two strip lights in my loft and connected to the juction box for the lights in the room below it has four terminals live,nuetral,the loop and the earth i have connected to the live and nuetral this works fine but you have to turn the switch on in the spare room to turn...

the filling link is always connected you have to put a key in to fill the system and the key is not in the pressue is always at 1 bar apart from when you turn the tap on for hot water so i don't think there is a leak

the filling link is always connected you have to put a key in to fill the system and the key is not in the pressue is always at 1 bar apart from when you turn the tap on for hot water so i don't think there is a leak

the filling link is always connected you have to put a key in to fill the system and the key is not in the pressue is always at 1 bar apart from when you turn the tap on for hot water so i don't think there is a leak

the filling link is always connected you have to put a key in to fill the system and the key is not in the pressue is always at 1 bar apart from when you turn the tap on for hot water so i don't think there is a leak

Hi i have just had this boiler fitted and at this moment the pressure gauge is at 1 bar which is fine as the heating is turned off but i noteced that when i turn the hot water on at the tap the pressure suddenly drops to about 1/2 a bar then when the boiler turns off it returns back to 1 bar is...

Thanks for that should the adaptor be glued into the the strap as well there is a small leak at the bottom of this as well.

Hi i'm fitting a strap and boss to a 110mm waste pipe and i have a slight problem i've drilled the hole and attached the strap and then pushed the fitting into it ,but it seems to be leaking at both the bottom of where the strap is connected to the waste pipe and also at the point where the...

Hi i'm thinking about getting a central heating filter i like the look of the SpiroTrap MagnaBooster² does anyone have thoughts on this product or any others that do the same job. thanks