Recent content by Mark Fresh

Thanks gents. CJRatch, do you mean these screws http://www.screwfix.com/p/easydrive-c-1022-steel-self-drilling-roofing-screws-5-5-x-85mm-100-pack/4225h ? Would they be suitable to hold up the weight of the PL boards, they look like they're 30Kg each.

I've had a call from the Celotex Technical Support team (I sent them and Kingspan the same questions above). I need a (something beginning with R) value of 0.25 and so 80mm thick GA4000 (so that's known as GA4080). I can fit it directly to the ceiling with mechanical fixings and/or batons, no...

Hi We have a garage underneath our house which spans underneath the hall and kitchen. The house is 25 years old and in the winter the kitchen gets cold, when we moved in 6 months ago we had an energy saving assessment, the main suggestion was to insulate the garage ceiling to reduce the cold...

Thanks John

Firstly, apologies it is of course a wireless receiver (from the room stat) next to the loom, not a wireless transmitter. Doh! Thanks for the comments so far. Which connection don't I need? There's 4 going in there (after I've removed the Wireless Receiver) I seem to be waiting rather a long...

Hi John Thanks. The boiler's been moved and so is closer to the wiring loom (in the airing cupboard above) and as we have to re-cable the boiler to the pump switch we're going to move the back plate too. Mark

I've had our Worcester Bosch 24Ri boiler moved out of the kitchen into the utility room. It was connected to a British Gas programmer model UP 2, with a remote thermostat and a WT wireless receiver (next to the hot water tank), wired up to the wiring loom (photo attached). The engineer who moved...