Pressure switch... So the shower is basically a kettle.
If the flow/pressure is too low the water will nearly boil in the shower heater as not enough cold water is constantly coming thru and the steams escape route is only the hose. Kettle boils it comes thru the spout.
This stuff spot on.
https://www.screwfix.com/p/mapei-ultracolour-grout-manhattan-grey-5kg/93218#product_additional_details_container
A big problem in showers with tiles is shampoo and shower gel residue. Its the additives that can cause the black mould. Always give the tiled area a good...
It looks like it has one drainage hole at the bottom already, but if you concerned about the water build up. Rake out some of the mortar joints and pop in a few weep vents at the bottom.
Hi There
Depends on the area. Is it a driveway or just a garden path. Had these in my garden
Marshalls Utility Textured Buff Paving Slab 450 X 450 X 32.
and cleaned up well with a jet wash every time. Got them in Wickes on offer at the mo.
When you closed the stop valves have they all opened up correctly again. Checking inside the boiler is gas safe only. Get the boiler looked at and a service at the sametime.
Return the skirting and check out Other timber merchants or the MDF range in B&Q Think that 119 x 18 mm . The only other way is if you know anyone with a Router table to cut the correct profile.
Why don't you make the left or right hand side so it bolts in place. This way you can un bolt and extend in the future. You'll only have two walls and the roof too extend and bolt the side back on.
Looking bob on. Nice and light and airy room now. Use either of the below for the skirting and the fitters won't rip off the boards. The grip fill is great as when you put the boards on you can also run a thin bead at the top edge of the skirting and wipe the excess off for a nice finish to...
For anyone reading who is new to getting any work done please read.
Regardless of friends mate etc or worked for them and it was spot on always. do your checks.
Gas safe if fire or boiler.
Same with a sparky check they qualified to do the work.
Google the company.
Google the persons name...
First thing to do is ring and ask him to come have a look at the issues. If no joy.
Second thing to do is email him with a list of the issues asking for a reply within 7 days or so.
In the meantime check if he or the person who touched the boiler is Gas safe and if not report him/them.
If no...
1900's house be twin brick with a very small or no cavity and if no refurb work done it won't have a DPC either. Burnerman advice is right on the nail.
You could leave down and install composite joists as they are very thin and won't rot.
https://www.wpc-decking.co.uk/composite-joists?gclid=Cj0KCQjw1qL6BRCmARIsADV9JtarNJSzunRYue-XFzWuLessR5bQPfBnbrpPIPqLScTzO3747J8cw7YaAh7kEALw_wcB