........HI ITS A BS2600 ...IM IN THE PROCESS OF STRIPPING IT DOWN AS I WRITE...NOT SURE EXACTLY WHERE THE SMALL GEAR BOX IS BUT IM GOING TO TRY MY BEST ...IVE TAKEN THE SILVER PLATE OFF THE BACK...GREASE EVERYWHERE INSIDE..IM GOING TO HAVE A LOOK AT SPINNING THE COUPLING NOW..
i really need some help on this..my trimmer engine works and the metal pole spins around when the trigger is pulled....but when i put the cutters on the pole the blades wont move...i've greased them and loosened the nuts on the blade but still nothing..i even put a new chainsaw pole onto the...
my machine was working perfectly one minute then when i went to use it again it wont let the water in...i've checked the pipe intake..loads of pressure and water,pipe not kinked,wont work on rinse or spin cycle either.....dont know what to check next....please help.....
Please help...when i press the ignition switch for the grill it fires up ok,but once i let go the flame goes out...i have to hold it for about a minute b4 the grill stays on...any reason for this...please help.....its a delonghi profesional dfg 90.....thanks....matt
I have a 02 combo 1.7 dti van,the brake lights on my van when pressed sometimes work,and other times not,sometimes just one side works.i have to press the pedal and get someone to tap the side of the van to get the light to come on..i've cheched the bulbs and wires..im stuck on what to do...
Hi.my flexicom boiler fires up ok,but after 5mins/2hrs a bang/mini explosion comes from the boiler,i've had someoone look at it but with no joy...could anyone plaese advise or help me with this problem...i posted this in trade talk and was advised to post it here...im a new user and know nothing...
Hi,my glow worm flexicom 15hx boiler open vent(3yrs old)is causing me problems...it fires up ok,but after 5 mins/2 hrs a bang comes from the boiler..its like a mini explosion..i had someone look at it,but no joy...please could anyone advise me what to do next or what the problem could be...i...