You mean the thickness of the cable? I'll have to measure it tonight. I did look at the cable to see if it had information stamped into it but I couldn't find any. I was balancing the oven on my knees at the time though, so I could've missed it!
They're there, just behind it
it'd be easier to use the same one, but if I buy a higher wattage/amperage oven than is currently in there, would it need replacing? Presumably the one that's in there now probably came with the oven and so matches it's rating? Maybe!?
Oh I see what you mean. I don't think so, there's a socket on the switch so it'd just go into there if it had a plug on it; you'd presume! I suppose there could be a socket hidden behind the cupboard but it seems unlikely. The wire comes out of the oven and exits the back of the cupboard...
No I don't know how it's connected; it was all in before we bought the house. I could plug stuff into wall sockets and turn off the breaker to see what loses power. If things other than the oven are on the same circuit, what does that mean in this case? Would it mean a 16 amp oven could trip...
Thanks for the quick response! Must seem obvious that the switch is working at 30 amps; I didnt realise that's how simple it was, thought it could maybe be as low as the oven requires (eg 13). Yes the oven is 240v, it does say that inside. Also thanks for the tip on calculating amps! Good to...
Hi all.
Amateur but competent DIYer here. Looking to replace our built in single oven but our current one must be older than it looks because I can't find anything online that'll tell me what amperage it is. It's a Rangemaster PRSOESS 6013 if that means anything to anyone. 2950 watt. Some of the...
Erm, well there's a chime in the house that goes off when I walk in, but I can't remember whether the garage used to do that or not.
I'm mainly referring to the actual alarm beeping when it is armed, and once it senses movement before disarming it.
Wow thanks for the quick reply! Is the sounder in the keypad unit or is it separate? sounds like I'll need someone out thought does it?
Is it not possible that I've somehow set the unit in the garage into some kind of silent mode?
Hi, newbie here and I'm having some alarm trouble. Well, technically speaker trouble or something because the alarm itself works fine!
I have the Accenta/Optima system. I can't tell you much more than that because I'm only basing that off the manual - the alarm was already installed when we...