Recent content by mrnewby

The other dilemma i have is having to buy another box of tiles to be able to do this. One option I was thinking of is if this 3 cm gap could be filled in with grout/plaster or whatever and then I simply reapply the 1.5 cm thick would seal strip again. This would not look the best but would...

I would do this but the tiles are very thick and I already had great problems simply cutting say, a quarter of one of these tiles. I would prefer to use a strip of something (wood, metal, plastic etc) for this gap. Its just that I have not seen these finishings in such sizes anywhere. Plus...

I have a 3 metre wall that is tiled. I have tiled the wall in such a way that the tiles do not rest on the kitchen worktop, they are actually in place approximately 3cm/just over an inch above the worktop. All sealing strips I have seen tend to be very narrow and would obviously not fill this...

I have a single unswitched wall socket. It has 3 live wires, 3 neutral and 3 earth. I presume that this socket is supplying a spur nearby? I have attached a double socket conversion plate kit. My problem is that I am having difficulty rewiring the double socket (the replacement) due to the...