Recent content by mvanjaarsveldt

Spot on, thanks for your help

Thanks, I have a meter and used it before. Just got the wiring diagram out, I will trace back and see were the signal goes tits up. As the cylinder is cold there should be a demand coming from boiler or timer. Will keep you posted. Thanks

I have heard the boiler fire twice this morning for a few mintes. So there seems to be some sort of signal coming through.TThere is no stat on the cylinder I will dig out the wiring diagram to see if anything obvious seems wrong. cheers

when I select hot water only the boiler doesnt fire. When I select both heating and hot water, turn up the stat in the living room the boiler fires. So c/heating seems to work fine. We havent made any changes to any of the controls timers etc.

Hi, the timer allows me to switch between hot water and c/heating or both. We have kept in on both even through the summer because the stat in the living room controls the c/heating. We havent changed anything regarding the timer. The cistern in the loft fills nicely and you can feel the cold...

Spot on thank you for explaning!! I have checked the tank in the loft and they all seem to fill nicely from the float valves. I only have water when the heating is on. Could it be that the boiler stat is knackered? Thanks

Great will have a look. Thanks. As the pump is ony on the central heating system what controls the flow between the boiler and cylinder for hot water and what determines the temp in the cylinder if the is no stat. (out of interest). Cheers

Hi, wonder if anyone can pass on some advice. I have a glowworm spacesaver 38 boiler. I only have hot water when the heating is on. I cant see any divert valves in the system and the water cylinder doesnt have any controls on it ie: thermostat. What controls the temp in the cylinder? and does...

Great thanks for all your advice.

Hi, Some advice would be great. I wish to replace all my bathroom taps basin included.There are also other leaking taps the need attention. The problem that I have is there are now isolation valves near the taps. The system spec is a "Santon Premier plus unvented hot water system". The boiler...

Great thanks for your advice. I will fix my own battens to the wall for extra support. Only thing I dont have is the adjusting feet. Can I buy them from DIY store?

Thought I would save £££ buy buying a "new without tags" bath on a auction website. I`m now stuck with a few questions. Firstly I have never fitted a bath before. I have read some of the questions on the forums and found all the answers except one. The bath came with no instructions. The bath is...

yes I think I`ll wait till he gives his qoute. thanks

Hi, your advice will be appreciated. Firstly a electrician is on his way to look at this and give me a quote so I just want to make sure I have some background on this. I have fitted a salamander pump in the airing cupboard and according to info on this forum the pump must have its own fused...

Thanks seco services. Your help is much appreciated