Recent content by myedsor

Hi Oilman. The feedpipe comes from the HW expansion tank (small one in loft) in 15mm copper down into the base of the hot water cylinder and also T's off in 22mm copper into the bottom left of the boiler. The flow into the hot water cylinder (22mm) comes from the top left of the boiler and...

I moved the pump because it was in the loft and was on the return side which I never liked as it causes negative pressure. I wanted to get rid of the wrongly piped radiator and thought it a good idea to move the pump at the same time. I have got home tonight and the pipe is not dripping yet...

I have had an overflowing CH expansion tank ever since I moved the central heating pump from the return side to the flow side. I have a Danesmoor 15/19 CF utility oil boiler. It is an open vent gravity fed hot water system with a pumped CH circuit. I have four pipes (excluding the oil supply...

Here's my setup. 1 - Live in a bungalow, all radiators are ground level. 2 - I Have an open feed gravity fed Hot Water system, pumped CH system. 3 - CH pump was in the loft on the return side of radiators. 4 - One of the radiators was connected to the return feed from the gravity fed side...