Recent content by nathansdad

Drained the water out and checked the pump but found no blockage. Seemed to work better although I had to put it on to spin again at the end of the cycle.

..also just emptied the machine of water and tried it again. Filled up with water then stopped and made a faint sound like a kettle heating up. Help

My washing machine has stopped part way through the cycle. The door lock LED is on and the rinse LED is flashing but nothing is happening. Have unplugged the machine in the hope it would reset itself but still have had no joy. There doesn't appear to be a blockage. Any ideas would be extremely...

I had a similar fault with my machine. It was suggested to me that someone had probably pressed an option button mid-cycle. Try unplugging the machine overnight then plug in again. This apparently resets the machine, although if not press the start button and let the machine finish what it was...

Unplugging the machine and leaving it overnight seems to have reset the machine!

I had the same problem with my Indesit. The following solution was offered to me on a different site and seems to have sorted things out. Hope it helps you: "many indesits have a memory on board, set the timer to off position, turn on the mains press start let the machine finish what it is...

In typical fashion my washing machine broke down one week after the warantee ran out. It is an Indesit W1A111. Having finished a load of washing and turning the programme selector dial to "off", I noticed after an hour or so that one of the cycle LEDs was flashing. I pressed the start/pause...