Recent content by newdiy

Hi @Gazzahoof , very much appreciated for sharing your project. it looks very well prepared. there is a roll of cable. how are you planning to your electricity to garden ?

Hi @Worcesterman thank you very much for your suggestion. sounds a good plan.

hiya everyone. good morning. I have prepare a base for garden patio, 10 x 13 ft. plan to lay porcelain slabs. it is now filled with rubbles as shown in the picture. what material would you recommend to fill the rubble gap and build a good foundation on top of this layer ? do I need a...

good morning Rob. mine is suprima. the vessel is 8l in red colour and is fitted next to boiler. What sort of services should I look for ?

good evening all, my boiler is potterton . the release valve with red cap (above the gauge) on expansion vessel is leaking water. I have now released the pressure to zero and it is still dropping water. what is wrong with it and what can I do? thank you very much in advance for your help

great tips. thankyou Tigercubrider

indeed, brush is a useful in draught-proofing. most letterplate/box 's sleeves can only accommodate a depth of 80mm when two sleeves are connected together, it is still shorter than my wall thickness of 109mm. how can I get around this issue ?

thank you JohnD and foxhole, that is a lot good information and advices.

good morning. I like to pick your brain on what letter box or letter box plates (inside and outside) I can have to replace existing draughty letter box in porch wall built in single brick wall. external letter box plate is metal and non-sprung so it rattles at windy days or night. it is fixed...

[should be ok with pinch of MSG.] seriously, i could do with some msg of fixing the boiler. not good when there is no hot water or heating

i have to keep my msg alive ....

just wondering if there are overlap between RGI and NICEIC. some RGI was shy away from coming to fault finding my boiler.

thank you superman123, agile and simon. is gas safe registered engineer required to know how to do continuity test ?

i know. may I ask what sort of rate do you charge to take a look at the problem ?

your input appreciated. I notice that flue pipe has become rusty and some of joints are breaking away. would this the cause of not-firing ?