Big thanks again guys that's what the problem was the neutral and switch wire were mixed about at the ceiling rose.
The reason I thought the black wire at the ceiling rose was the switch wire is it had white tape around it and plus that's the way the old light that I remove was wired up so I...
Hi thanks again guys I will check ceiling rose again and take picture
You say between L and N must always be 240v I have posted before and said between L and N was 0v when lights are on which I found to be strange I thought the live should stay live at all times is thus correct?
Will check...
Yes that's correct the brown wire with the black tape around it is the switch wire for the wall light with the back wire running to the other switch
Cheers
links to photos above on the 1st link the right hand side is the ceiling light with live feed and left hand side is the wires for the wall lights
Thanks
Hi Sparkwright
Please find attached photos for you 1st one is the back of the switch with live feed coming in you will see i have bridged across to other side with brown wire the red wire here is the live.
//media.diynot.com/217000_216565_74916_49008846_thumb.jpg
Next photo is the...
HI EFLImpudence
Thanks again for the response here is my answer hope you can help from the results.
With ceiling lights in both off positions wall light work
with ceiling light off at the ceiling rose i get the following results
between N and L = 244v
between E and L = 244v...
Hi thanks to everyone for there time and replies very kind.
To answer a few questions asked here goes.
EFLImpudence - Yes wall lights work when both ceiling light are switched to the off position.
SUNRAY - I have re checked and neutral is defo wired correctly
One thing i am now...
Hi
I am in the middle of adding wall lights to my living room but have came across a problem if someone could help out please.
I have a 2Gang 2Way switch at both ends of my living room and am looking to have a switch at each end one to control the wall lights and the other to control the...