Recent content by norwoodt

Hi there We're wanting to move our HW cylinder down stairs into the garage (this is directly below where it it situated now) the boiler is down here so the pipe work alterations will not be too drastic. My concern is, will i develop air, or air locks with the hot water? With it having to...

pump is a newteam duraspeed

Do you think i should raise the tank, or look at replacing a shower part, or both?

Sorry for not responding. Thank you for all your advice, OK I have had a look in the other loft side (to locate the other, tanks) there is obviously the main water tank and a small feader tank. Now these two tanks are built on a platform (about 1/2 a metre high), and the other tank, at...

many thanks for all your responses. There is a seperate tank for the cold side of the shower, and the other tank feeding the the hot and the cylinder is located the other side of the house. not sure of position of header tank, ill check and get back tommorow. Im positive the hot water...

The mixer shower in question, has a twin pump located in a closet, from a gravity fed system. As it is one side of the house, it has a seperate tank which solely feeds the cold side of the shower. Hot supply is just picked up via the cylinder. The problem we have is the tank (feeding...

ive just had a msg from a customer, who's overflow rom there HW storage tank is leaking. hes had a look and said its not the ball valve, but he can feel water coming in from one of the oulets, if memory seves me there is at least two oulets as thee is a shower pump. cant go look at it till...

new cold feed from the tank onto the heating system? yes what about any high points that can collect air? non that im aware of what was the system water like when you drained it to fit the tank? didnt seem bad (havnt fit a new tank)

Many thanx for your quick response We have put a new feed in tho, it just didnt seem to come through

A customer of ours has just called to see if the fernox ds 3 lime scale remover is any good, its not something we're familiar with. He explanes that the water hardness in there area has recently been improved, and he has changed the HW tank. The taps pressure are not what they were, he...

I have been workig on a house, the central heating is open vented, with a floor standing boiler and standard cylinder in airing cupboard, There are two moterised valves one for water, one for heat, and the pump sounds fine. (not sure about the room stat) I have been to this house before...

my parents, had a mega flow tank fitted 18 months ago. now, recently they have been using both showers in the house at the same time. but they are both really poor, although 1 on its own is fine. the pressure coming into the house is regulated (5bar) (15mm) the supply cold in the airing...

I am about to fit new honeywell 3 port mid pos valve, on a like for like basis, (think the valve is sticking in one position, this making hot water too hot, and not heating the central heating enough) any hints and tips before i wade in?? cheers

Right laugh! :? think they run under a new concrete floor!!!

thanks again i will try this and let you know the outcome! if it is a blockage, what would be the next step?