Has anybody fitted a stainless undermounted sink underneath a finished granite worktop? The sink instructions suggest drilling a series of holes underneath the worksurface and attaching brackets via a m6 stud and insert. After paying a fortune for the granite I don't want to start drilling with...
John
Thanks for the suggestion. I've looked at the instruction manual. There is no adjustment available on this model. The machine is only three years old. The next step is to take the pump manifold apart to see if there is a blockage within the "core" of the machine.
Hi I have a slim line Bosch Dishwasher. I have noticed that the cleaning recently has been poor. After a bit of analysis I can see that the top spray arm is not rotating. In fact there is no water pressure to the arm when the machine is in cycle. Both the top and bottom arms have separate...
Andy
many thanks for your quick response appreciated. The problem that I have is that the quality skirting boards are quite high (30cm). They have large holes drilled into them for the ring circuit feeding the sockets. It would be very difficult to achieve a satisfactory repair to the...
Hi guys
I've be very pleased if somebody could advise me of the best way to fit 2 gang 13amp sockets into wooden skirting. The sockets at present are surface mounted and look ugly. I wish to make them flush with the skirting.
cheers