Recent content by Paul Mellor

Fair do's, it also say's they need to be installed as far upstream as possible,is this towards the tanks or the shower?

Hi there,Installing a Trevi boost shower valve and in the instructions it states single check valves should be installed on the supply pipes,are these 100% nessesary or can i install without them?

Hello all,quick question just chased out wall to fit 22mm and 15mm pipes to new shower.when covering the pipes back over with a mortar mix,what is the best way to protect them from the cement.I will be tiling over this area afterwards.

Thanks i have the hot water supply no probs.

Hi,has anybody out there got any experience of venturi mixer showers,ie the trevi boost.As i have not got a cold water feed from my tank and this would be a right pain to run through the house.Do i install the trevi or bite the bullet and pull up my floors.Your thoughts would be appreciated.

The trouble with fitting a pressure reducing device,is that the cold water pipe also feeds the rest of the bathroom/kitchen,would the pressure be a problem if i just fitted a thermastatic mixer without a pressure reducer,given that i have 2.5m head wih 22mm pipe feed to the mixer.

Hi there,my question is,i in the process of fitting out a downstairs bathroom which i only have mains cold water and hot water from tank in upstairs bathroom approx 2.5m head,22mm pipe.Would i be better off with a venturi type shower (trevi boost)or would i get away with a thermo mixer.To run a...