Recent content by Philario

Ok bud thank you for your advice

The instructions say : Use installation compound adhesive or a suitable adhesive to cover the full area under the shower tray. Apply or trowel to a thickness suitable to allow full adhesive support of the shower tray Note! Always follow the instructions supplied with an adhesive and do not...

I don't think it is flexible no. What is the reason for needing flexible adhesive? Thanks

Thanks for quick reply. The adhesive I got for the tiles is a cement based one suitable for wet areas (including swimming pools) so I presume it's extremely waterproof. Would this work?

Hi all I'm about to secure my new shower tray, which is acrylic backed ABS finish, onto 'No More Ply' backer boards. This is a link for the actual tray http://www.mx-group.com/products/shower-trays/all-shower-trays/1200x900-lh-optimum--flat-top-ulg/ My query is.... What's the best way...

You're right my understanding isn't very good, but I wired it exactly as it was previously, and I did the same for the kitchen ones. I am taking this on board and I will refer to it all when I look again tomorrow. Sorry if I'm frustrating you, I'm just trying to get an understanding of how...

Yes they are off too. Is it odd that the kitchen lights still work though coz they on the same circuit as downstairs lights & smokes

This is what I mean. Sorry for the confusion.

That's what I reckon. Would it be much of a job for an electrician to sort if this is the case?

It's not that it's tripping out, I mean that's what trip switch it's on.

Ok thanks will check again tomorrow

I double checked wires, I will check again tomorrow. Why has it affected others though? (Hall, living room etc) because the kitchen is in between hall and utility. Kitchen works nowhere else downstairs does? :-( Thanks for all your help guys.

I put 'down light circuit on RCD' because that's what it's called on the RCD unit. It's the downstairs lighting trip. The kitchen lights all work fine. It's the utility lights that don't work & I double checked the connection. I think I will need some testing equipment or get a pro in. If...