is PCB a circuit board? I'm SO not up to that job. I'm best calling the housing association and giving it a good cry to get them out,.
Thanks a lot mate for the help. at least I'm not driving myself mad thinking I'm a ****** anymore!
hello, I'm hoping someone can help me.
I have a Vaillant Ecotec PLus & a Digistat RF+ wirelss thermostat.
I don't know much about how they work but downloaded then manuals to try to help myself.
I have hot water fine but the radiators won't heat and there is no radiator symbol on the...
hi, I have the same problem except my thermostat is set to 30 degrees and nothing!
it says the room temp is 27 so I set it to 30 so it should decide to turn on the radiators to give me the extra heat right?
no radiator symbol & no heat & my poor little baby is getting cold at night now...
I have 2 tightening/securing bits.
https://spares.bigwarehouse.com.au/images/636901.jpg
Am I supposed to use these both on either side of the rubber where the 2 hoses are connected or does one get used at the end where the entension hose is plugged into the sink?
Thanks!
I have 2 tightening/securing bits.
https://spares.bigwarehouse.com.au/images/636901.jpg
Am I supposed to use these both on either side of the rubber where the 2 hoses are connected or does one get used at the end where the entension hose is plugged into the sink?
Thanks!
Yes!!! that is what I mean! Thankyou....I was going mad as I just don't know anything about this at all. I finally received my extension and connector kit and can only pray that I fit it correctly!
Thank you
I know I may sound stupid but I have never fitted washing machine hoses or the like.
I have bought the extension for the drainage hose as it was too short.
I am fitting it to the hole (where other tube was) on the left under my sink. Can anyone help me?
Am I supposed to put the plastic...
i have some dulux gloss paint already but want to know do i just whack it on over the paint thats on the door or does the old gloss need to be removed and if so how?
thanks
I am about to sort my house out! I have a cordless drill that I can use for the soft jobs but I need something that will drill my masonry walls & also through tiles for my shower screen. I also need sander for the gloss doors and skirtings?
Any advice? I don't want to spend a fortune and...
What is the difference between solid wood and engineered wood flooring? I am doing my living room which is quite small, 3 x 3 metres and was something that will last very well over at least 3-5 years.
which should i choose?