Hi All
I have a floor lamp that uses 12v g4 bulbs and is controlled by a dimmer/transformer switch. This switch has broken down and I am wondering if I can by pass this and convert the bulbs to 240v g4 types. Any help gratefully received.
Thanks John g :shock:
Thanks for the quick replies folks and the reassurance. I thought the extra wires must be coming from spurs. Will have to investigate.Thanks again folks. John :)
I recently decided to fit a new plug socket to an existing outlet.I switched of the sockets switch on the main board leaving the lights still on. I disconnected the old socket, which had 4 wires each of red, black and earth connected to it and proceeded to straighten them a little on doing this...
I recently removed a flourescent light unit only to find the wires hanging loose and no idea how they were originally wired. There is four seperate cables each containg a black,red and green/yellow wire The light has two switches were it may be switched on or off. I realise one red live will be...
Thanks for the replies folks, I was wondering more about the types of connection to the soil pipe and what was the easiest method. Any suggestions welcome.