Recent content by PJST

Interesting comment ericmark, so the thermostat needs to be in line of the rays from the heater. So would you say the wiring should be as stated above, through the stat/receiver?

I have purchased a Surya Infrared 750W panel wall heater with separate stat. I have installed a 13 amp fused spur under where the infrared wall panel heater is to go. To this I have connected a Salus RT510RF receiver which will connect wirelessly to the Salus thermostat/programmer. Reading...

UPDATE Electrician called back end of his working day today, checked wiring and added a link, small change to boiler and it is working. Drayton Wiser technical were very helpful and provided enough information for him to know what to do to get the system to work. One helpful bit of advice they...

I understand your point Dan, but he a reputable electrian, he has done many jobs for us and he was round fitting LED lights for us so it made sense to ask him.

Sorry misread, thought I read do you think it is wired correctly. Just reread your comment, I think it must nbe the wiring everything in the App seems correct. The boiler worked correctly with the Draytom Combo Boiler room stat before the Wiser was fit.

I would have thought so the electrician has fitted LED's throughout our home and a new consumer unit, he is a reputable company. I think I will contact him again tomorrow I don't know what else could be causing the issue. Thanks for your comments

I purchased the Wiser system starter Kit-1 My electrician fitted the system Friday afternoon. I downloaded the App, set up the Hub and the 2 Drayton Wiser thermostats. So far so good, they are all visible for their rooms, the flame icon shows when a valve is calling for heat, the hub lights...