Recent content by Readonly

Try reading: http://www.tlc-direct.co.uk/Technical/DataSheets/Systems/TouchRemote.htm Note that these switches don't use standard 2 way wire configuration. You may need to make some changes in the ceiling rose/junction box. How many cables and cores do you have behind each switch?

I’ve was talking to someone at work about some electrical work he’s had done in his house recently. Part of this involved a replacement CU. He told me the electrician didn’t have space to mount it the normal way, so has mounted sideways in the cupboard. This sounds very strange to me as I have...

Still wired incorrectly! First can you confirm the following: Switch1 The Red wire connected to the common terminal comes from the same cable as the blue & yellow wires (3core+earth), and that the remaining red & black (2core+earth) are from a separate cable. If this is the case...

I used one of these radiators recently. Just remove the 2 plastic bungs with a large screwdriver, they just unscrew. From memory the bungs where at the bottom. Put the supplied end stop and bleed value in the top openings and the valves in the holes left by the bungs.