Recent content by Red316

I only have 1 connector block and the earth is on there?

Actually when I bought it there was no mention of single or double it was just...hive thermostat Ok I've done what you said and attached a photo of the new setup, this will still work on a combi boiler with a dual channel?

When I turn the switch on, with the wired settings I've attached, the boiler starts up automatically and stays on. Whatever I do on the app/thermostat it won't turn the boiler off, but I'm convinced i can't be the wiring if you guys suggest it's ok. I'm using a Biasi combi boiler and the hive...

I kept it on for over an hour to determine whether or not it was the delay of the app/thermostat. Neither can turn the boiler off on command

It's a solid green block LED so appears to be paired up If the batteries are out of the thermostat it's still powered up. The receiver lights can bu turned on/off, but the boiler doesn't turn off and stays on, regardless of whether its turned on or off on both the receiver and app

Only if i turn the boiler off itself, doesnt with the thermostat either

I can't seem to be able to turn the boiler off by the app/thermostat. It'll only turn on then stay on, what would the problem be?

Does the 1:Common need to be connected to L: Permanent live to work? What would happen if they weren't connected?

These connections are for a Biasi boiler, do the wires look in the right place?

Attached , settings

Hi I've changed these wires around now yes, attached is the setup I now have, hopefully these are the correct settings for the Hive and will check now to see if the thermostat will now control it properly

Great I'll get the earth terminated properly, unfortunately the controls don't seem to be switching the heating on/off like it should, same with the app, hopefully these wires are in the right place, thanks

Hi, I've just changed from a EPH thermostat system to Hive, just wondering if anyone could help in matching the wires up for me, are they installed correctly? I've attached 2 photos showing the change I've done between them, thanks