Recent content by Sam4

  1. S

    Faulty Vaillant VCW GB 242 EH boiler

    I have the same boiler and have a similar problem. My heating is working fine but I don't get any hot water at all. Is this the diverter valve or could it be something else? Any idea of how much the part would cost if it is the diverter valve? Thanks.
  2. S

    Unbelievably loud banging from pipes

    When the hot water is turned on (not running hot water just heating it) there is often an extremely loud banging noise that lasts a couple of minutes and sounds like a group of people are banging pots and pans on the pipes and the whole thing is going to explode. Is this air in the pipes or...
  3. S

    Myson Apollo Boiler

    We have the same problem with our boiler (same model). The fan comes on every 4 minutes exactly and it keeps me awake as its next to our bedroom. A plumber looked at it recently and said there's nothing he can do so we'll have to put up with it until we can afford a new boiler.... I share your...
  4. S

    What is this noise from the boiler?!

    I have a myson apollo fanfare boiler. There are 2 strange noises that concern me... 1. When the CH and HW is off the boiler seems to come alive every 4 minutes. It is not firing up like when the CH or HW comes on but rumbles away for about 30 seconds and then turns off but then comes on again...
  5. S

    Turning off the boiler

    Our boiler has become very loud with the electric fusebox clicking loudly and the boiler trying to ignite. The controller says that the heating and water if off but the boiler is on the radiators are boiling so I am guessing that there is a problem with the timer/programmer and/or thermostat...
  6. S

    Changing central heating controls

    It is a DataTerm EMS+
  7. S

    Changing central heating controls

    How easy it it to change the controls for the central heating? We have just moved into a new house and its the most complicated controller I've ever had to use. The current one is called Warm World and it doesn't allow you to just turn the heating or water on for an hour or whatever you seem to...
  8. S

    Surface preparation for lining paper

    Thanks - no I didn't leave it to dry becuase I thought it looked too bad next to first good piece! But I will try it again today and just leave it if it bubbles slighty and see what happens when its dry. Cheers.
  9. S

    Surface preparation for lining paper

    We have just removed old wallpaper and the walls underneath have got a mixture of plasterboard and what looks like concrete/cement columns of some kind. As they are really rough with lots of old paint we have decided to hang lining paper and then paint over. To our surprise we successfully...
Back
Top