hi funnily enough went down the shed to get my multimeter
LCD Display seems to be crushed..
nipping out to get a new one now..
could i be a pain as you seem so helpful if i sent you an email schematic drg of my
wiring as it stands you could study and show me
a) where you think possible...
hi mandate thanks for this
Now testing the wiring....ha ha
I know what your going to say get an electrician in...
well yes if i could a. get hold of one and b. afford one right now...
so here we go im sure with a little help from my friends this can be accomplished...I DO HAVE A TESTER UNIT...
ive looked at nearly everything i can on the web about the wiring of this system..
they all seem to require a room stat...of which i have none
that doesn't mean to say that the system hasnt worked (or has it properly worked)? for the last 12 years or so.
set up is BOILER = COMPLHEAT...
ive looked at nearly everything i can on the web about the wiring of this system..
they all seem to require a room stat...of which i have none
that doesn't mean to say that the system hasnt worked (or has it properly worked)? for the last 12 years or so.
set up is BOILER = COMPLHEAT...
exciting stuff this learning and saving on the job with your help
i know i shouldnt start a new topic but you couldnt recommend a good site to learn how to use a circuit tester could you.. got one but no instructions
thanks again
so to make sure I connect to the right wire
look at the wiring in my programmer..can I do that by just lifting the front panel of the programmer to check???
hi good people
replaced motorised valve y plan
need to know where the white wire needs to connect and with what...
all diagrams i have seen seem to indicate should connect with terminal from room stat..
now this is where i become ignorant and helpless
i dont have a room stat. for heating...
this looks to be an old kind of thermostat held in place by a spring on the cylinder ive set it to 60 thinking that would be appropriate with the dial pushed in. how do i check if thermostat is serviceable?/
thanks
I have obviously looked thru all other posts..however never seems quite what your problem is
problem hot water no central heating
equipment downstairs boiler gloworm fuelsaver
operated by honeywell control box timer heating and water
upstairs airing cupboard Honeywell 22mm 3 Port Mid Pos...
seem to have same problem everything just stopped working no warning signs rang glow worm system at right pressure but total inactivity in boiler except for facia neon light still on
stripped front to look at neon indicators for diagnosis not one of these were on does this mean a replacement...