hi, ive been told that when having a new combi boiler system installed that you have to change both valves on the rads because the pressures are different from when you have had old systems on to new systems. It was a really old G rated system we had before and the rads are over 30 years old...
Hi we have just had a vailliant combi 837 ecotec fitted and i was not very pleased with the person who fitted it because he only fitted 1 thermostat valve on the radiators , but my question is should both of the valves on the radiators have been changed as 1 valve is brass and the other is...
Hi we have just had this boiler fitted, when using the cold water or using the toilet flush the boiler fired up, so we had a one way valve fitted and had the dead legs capped off on the pipe work and it cured it. But now the boiler ocasionally lights up when no water or heating is been used and...
is it ok to put airbricks in without putting the liners in? just knock a couple of bricks out on the inside so air can get through the airbrick and vent the joists
Hi my mate has just bought a 1930's house and he were advised to have a few air bricks fitted on the back of the house as there was a bit of damp getting in and there are no air bricks fitted. Where should the air bricks be? Above the damp course or below it? Should it also go straight through...
we had the boiler moved 20 years ago, and the person did not put a motorised valve on it. We only have this problem in the winter because obviously we use the hot water and central heating together
I have a thorn central heating boiler , when using water only the water is piping hot (reasonably quick) but when using water and heating it takes alot longer to get hot and also is not as hot. Water only does not work on gravity due to it being a fair distance away from the hot water cylinder...