turning the mains supply off to the boiler did not make any difference will try the ev thing again folling it step by step will report back when i have tried it
the system works as it should i set the pressure when cold to 0.8 it reaches 3 bar when hot kicks the prv in when the ch goes off the pressure when cold gets to 0.5 bar the filling loop is dissconected and no water passing this has possibly been the problem for at least a year but it was ok on...
hi to anyone that can help
the above boiler has had over the last 2 years every part changed and i even have a boiler for spares my wifes dad is a plumber but old school so he dont know a lot about combis
over the summer everythings been good hardly any pressure drop now the winters here and...
right work this out to go with the problem
the machine is plugged into the socket turned on the machine is off it starts to do a normal wash nothing shows up on the display panel until al03
can anyone help
can anyone help on this matter
i have the above and a error code al03 has come up i searched the net and it suggested the pump or drain hose was blocked both of these are ok i did notice that the impella on the pump did not move freely is this ment to as i dont know when i put it all back...
hi the above boiler has a problem in when turning the h/w on the c/h on the diverter valve kicks in as well even wheh the switch is set to h/w only i have cleaned everything i.e phe diverter valve out even the brass manifolds as well and its all clear any one any ideas