Recent content by signum

Right, the panic button is now working fine, says secure. The front door however, I've twisted the tamper pair which gives me secure. But when the door opens still says secure, its like its not picking the magnet up, I've tryed another magnet next to it and moved it away but still no luck. The...

Quick update, I've just changed the wiring to double pole, and now on the door contact and panic button I get tamper . The panic button is a cqr and I have the diagrams for both. They say no jumpers need to be fitted if using traditional 4 wires which is what I am doing . Shall I twist the...

cheers for reply guys, The panic button already has had all the jumpers taken off apart from the one on bottom right which says normally closed. ive just checked the zone status and got as follows Zone 1 (front door) >65k active zone 4 (panic button) >65k active

Hi all, still got a few problems with this alarm :cry: :? .... Everything is connected up now. when i go to set the alarm i get a message saying panic button active and front door active. I think i must be missing something hear. the door contact is a knight yend 74 with resistors. i've...

Yes installed a g2 steel button, using 4 wires 2 alarm 2 tamper, jumper set to deafault normally closed. Which is what the wiring choice is promgrammed for on the 48

thats sorted cheers, i still get a message saying active panic button ? is this normal

Also when I choose to do a walk test in engineers uti I get a message saying none

Sorry to be a pain again. I've linked out the 2 pir that haven't come yet, so I can do a few tests on the alarm, soon as I log out of engineers I get a aux tamper, panic button active? Any suggestions

Spot on guys, it was 37 , just changed it to grade 2 and its worked... Thanks once again everyone for your feedback

Yeh sorry about that, it was ment to say something along the lines of, I'm in the engineer menu under engineer utilities , trying to change the standard engineer code to my own 4 digit code, but doesn't accept the code I want. The same also goes for user set up menu, when inputting the new code...

System config option 10 is just Mentioning that sometimes a user code maybe needed first before an engineer can gain access, I've already gained access so this doesn't apply, il try changing it to a 6 digit code in the morning, to see if this works.

Quick update on this, ive just done the first power up of the system, thought id get some programming out of the way as im just waiting on a couple more P.I.R's ive ordered. Obvioulsly i get tamper faults on the 2 zones that i havent got the P.I.R's for yet, everthing is just about programed...