Recent content by skouser

Thanks again John. I appreciate you taking the time. Ed.

Thanks for that John can you recommend a make or the best place to get the more reliable, longer lasting lights? I think I should say that it's not the expense to keep the lights working that is the main problem (although I'm not made of money) no, it's the lawmen. It has happened twice now...

Hi, I have had a small Duuo trailer for years and although I'm not always using it, it has proved time and again to be worth its weight in gold; however, I have had an ongoing problem with it - the lights. Due to its light weight it is thrown around quite violently, especially when empty and I...

Success! :D I tested all the wires in the machine for continuity and discovered something strange. I was getting a reading on all wires except for a neutral wire. This really puzzled me because it was coming from the plug and showed a reading all along its length, (in and out of a plastic...

Thanks for your interest and for offering your ideas folks. I have checked all over and can't find a safety switch, apart from the one in the collecting bin that must be engaged in the unit before the motor will start. As regards the reversing switch I think it is probably okay as the whole unit...

Thank you for your assistance, but please see paragraph 5 of my original post.

Thanks again Crystalclear for taking the time to find that information for me, but after checking out that section on troubleshooting I was unable to fix the problem. My model of shredder seems to be a little later than the one in the download and does not have a reset facility. Still, I am not...

Thanks for that Crystalclear, I have downloaded the pages and am printing them. I will get back to you. Thanks again.

HI, At 70 I'm trying to get to grips with this Internet thingymajig, so if I've written this in the wrong place or in some other way I've broken the rules, please accept my apologies; the fact that I'm able to write this at all is a triumph for me. Anyhow, down to business. Can anybody please...