Recent content by slu

  1. S

    Query about adding new light to existing cabling

    Yep makes sense - will check with them unconnected then connected, when connected resistance should be minimal. cheers
  2. S

    Query about adding new light to existing cabling

    (imagine this photo rotated 90 degrees clockwise - but you get the idea with the snipped cables) Yep makes sense - will need to check the existing cables, although testing is going to be a bit of a chore with the cables being as short as they are, the rose end isn't so bad but switch end has...
  3. Untitled

    Untitled

  4. Light Fitting

    Light Fitting

  5. S

    Query about adding new light to existing cabling

    Pics are just uploaded to photobucket and linked, nowt more than that. Having taken a look in the switch box now, can confirm that there is a snipped pair of black cables in the box (very similar to what is in the spare light fitting), so im assuming that once upon a time the light fitting...
  6. S

    Query about adding new light to existing cabling

    Yes - all cables are black - and yes there are two cut cables not terminated, you are correct (I actually forgot all about these). You could well be right - it may have been a tube or some other type of strip that left the indentation on the ceiling - I will have another proper look this...
  7. S

    Query about adding new light to existing cabling

    well, having used a meter I checked from the pair of taped cables to the other pair of connected black cables - which showed 240v regardless of the switch being on or off. The problem is going to be getting a cable across from the existing rose, I was hoping that the existing roses were...
  8. S

    Query about adding new light to existing cabling

    Thanks for the reply - sorry think i was just in the process of resizing, if you refresh it should be ok now. On the working light front, I haven't whipped that other one down yet, was aiming to do so at the weekend once I had purchased the pair of new light fittings. intending using these...
  9. S

    Query about adding new light to existing cabling

    Hi All first post - hopefully a simple one to solve. My flat still has the original cabling from when built (late 70's), and in the living room there is currently one light, one switch. as it stands there is an old ceiling rose further along from the current light that appears to be...
  10. S

    Projector in garage too far to get wifi. other options?

    if it was WIFI primarily you were after, the other option is running a network over your pre existing powerlines. You can easily run a 500meg powerline adaptor network from your router to the sockets in the garage - they are pretty stable and more than capable of streaming full HD video.
Back
Top