Recent content by smiffy6969

ok, I totally understand, thanks for the advice, maybe it is time to call someone out.....

Ok, thanks alot, I will try bypassing the thermal cutout behind the LP sensor, as this is simple, I will run the system for as long as i can but no longer than an hour to check if it still cuts out, keeping an eye on the temperatures in the radiator etc. I have not been in the chamber at...

i can test this by isolating this sensor and running system with it isolated, I did this with the low pressure valve to test it was that when it went wrong two years ago, then when I was happy it was that, took off and cleaned it. Paul

when you say ch sensor going open, we talking the temp sensor behind the low pressure valve, this is a standard temp sensor like what you get in washing machines (im a electronics engineer). This thing tripping out when at temp (it's inline with the low pressure sensor in series with it), cause...

sorry took so long, bloody phone messy me about now......... :x

various

Hi, it's flashing real quick, like 5 times a second at least. I just tried running the heating only, without touching the taps. Here is what I have found. If you run the taps, it works fine, you can fill whole baths and it works without an issue. If you put the heating on, the...

Hi, I had an issue with this boiler 2 years back, basically the igniter was firing 3 times stopping and then doing nothing, due to this the boiler wouldn't fire up. I was told it would be the low pressure sensor, the one that sits near the top right hand corner of the boiler. I drained the...