Recent content by Snooper

It could be a Left Hand Thread!!!!

Try taking the speedo cable off the speedo and spaying WD 40 down the cable .sounds like a dry innercable catching on the outercable.

How can I stop the print/dye from a dark (brown) wallpaper from scuffing off the edges .When the paper is hung you can see no joints between drops but when it is drying you can see the joints quite badly. The paper has a coloured edge to it but it still shows as a very visible white line when...

I will find a pic of the ISCV location for you .It is located at the front of the engine to the right of the inlet manifold. You can only get a new gasket from Ford,i will look up the part number for you tomorrow.

Have you got the idle problem sorted? If not then it could be the idle speed control valve (ISCV) is gummed up and dirty. It is an easy diy fix ,you need to get some carb cleaner and a new gasket .Then its a matter of removing it and spraying the carb cleaner into the two holes in the body .You...

I am new to these forums and not a plumber but I consider myself fairly competant at most diy. I may be corrected for saying this but most over the bath showers use mains pressure cold water and heat it according to the demand needed. Also if the cold water to the bath taps is only fed off the...