Recent content by Sparky1970

Thanks Steve :D

We are changing our oven to a Neff single oven from a Bosch, I have slotted the oven in to ensure it fits ok and can confirm all the measurements are ok with reference to installation. The Neff oven seems to sit back close to the wall more but most ovens are the same depth when shopping around...

Thanks guys, thats what I thought. :D

New mcb with grey switch with plastic clip at lower rear which doesn't seem to do anything.

Thanks for reply, Yes they manually push up but there is nothing for them to clip into, only the hook on top part of mcb?

Hi, my current hager split board was manufactured around 2000, the mcbs have a metal clip on the lower back part, the newer hager mcbs of the same type have a plastic clip, I think they are for locating on the din rail but on my c/u they dont appear to do anything, it appears that they just...

Hi, we have a peugeot 206 2005 3 door model 1.4 which currently has steel wheels with plastic trims, we have aquired some 2nd hand alloys which have come off another peugeot 206, the tyre size is the same only difference is the rating, current tyres are 82T and the alloy tyres are 85H, is this...

Hi, Im thinking of renewing my patio and path area in my back garden as it is poorly laid, I would like some advice on planning to achieve a quality job, ie - where do i start ! Obviously I would need some skips to take away whats there and dig down deep enough by shovel ! I need advice on...

Hi, a friend of mine has a problem with a worcester 24 cdi boiler, its losing pressure on a daily basis and they are topping it up nearly every day, there is no water leaking from vessel and the schrader valve is releasing air only, they have pumped it up previously but it doesn't appear to of...

Job done, 10 minutes to change, just the draining down, re-filling and bleeding took a while, thanks for all your replies :)

Boiler iso's? Is that Isolators?

Thank you for your replies, I have a new ev ready to fit now, does the ev need charging to a correct value for my particular system?, the shop said they come pre-charged. :?:

When I press air valve pin in water comes out and there is evidence of water leak on the rim of vessel. Shall i get a new ev or pump it up then? regards

Ok, I need a new ev, are they quite easy was to fit? Is it just a case of draining system to zero pressure, undo nut to ev and replace new one? Do i need to charge new ev with air or are they pre-charged? :?:

Can someone please help? :roll: