Recent content by Stefran61

As I suspected. The valves are on towel rail of a friend, they have recently had the floor tiled and only left about 5mm play below nut, not enough to undo valve nuts fully, so I will have to remove the complete rail to get valves off. Not sure about the system but would put my money on a...

Thanks Burnerman that was swift! I am assuming to replace the 'o' ring would require removal of circlip, and removing the stem from body. Will this require the draining down of system, if so I will just replace the valves.

Have a leak in a sraight through rad valve stem. I have removed cover hoping to reveal the glad nut, however there is no gland nut, just a circlip holding the stem in place. My question is are these type of valve repairable, if so how and do I need to drain down?