Okay, thanks, but bearing in mind that the Potterton manual says to treat a Programmable Thermostat as an External Timer, I guess the wiring should be as follows?:
Boiler 9(N) to Neutral on RDJ10
Boiler 8(L) to Live on RDJ10
Boiler 7 (Swl) to L1 on RDJ10
Boiler 8 or 4 (L) to Lx on RDJ10...
You mean the link between 3 & 4? The Potterton instructions say that the link should be retained if a programmable room thermostat is being used. I did however remove it anyway just to see if it would make a difference and still no joy...
Thanks Guys - According to the Pitterton instructions, a programmable thermostat should be fitted as an external timer, so I've concerned myself with connections 7, 8 and 9 on the boiler. I have connected up the L and N connections accordingly and connected Swl on the Potterton to L1 on the...
Hi, I've purchased a Siemens RDJ10 RF programmable thermostat to fit with my Potterton Puma 100e. Can anyone please advise on wiring instructions?
Thanks!
I have a Potterton Puma 100e. Works fine in every respect, except that the water temperature doesn't stay constant when taking a shower - it goes from hot, to cold and back again constantly - hot-cold-hot-cold....etc. The cycle of hot to cold probably takes a minute or so. I inherited this...