Recent content by stu1972

Hi, Could any installers / engineers please advise which would be the sounder financial investment, i realise that you will always get a bad one in a batch whatever you buy but in terms of build /component quality and known reliabilty which brand seems to fare better? Kind Regards Stu

Thanks for the reply Gasman, Bit of a nightmare to change really as it means ripping up the tiled floor in the bathroom. Were only really talking a run of 2.5m in 22mm to the bath. The reducer can be fitted approx 2m from the DHW outlet. What do you think? Cheers Stu :D

Hi, We are in the process of removing a conventional gas central heating system (i'm not touching the boiler btw). The hot water supply from the water cylinder is piped in 22mm which then runs through into the bathroom into the bath hot tap. A reducing tee comes off at 15mm for the basin and...

Hi, I have accepted the fact that my 25 year old boiler has to be put down but am unsure as to which condensing boiler to go with? Need around 32kW preferably with a built in flexible programmer. Would appreciate any feedback on which boilers tend to be most reliable, i read in horror that...

Oh dear, Gaz, Thanks for the reply, It's had a good innings mind for a 25 year old boiler eh? Could a condensing model be fitted into the existing flow/return pipework? It's all done in 8mm microbore to the rads as well, is it worth ripping it all out and going for 10/15mm for a...

Hi, Have a Thorn Apollo 30/50 conventional boiler piped in a Y plan configuration controlled by a Honeywell ST6400C programmer with a Honeywell V4073A mid position valve. Firstly my high temp stat is dead, i know this because if i let it run on central heating only it will continue to heat...