stuarta's latest activity

  • S
    stuarta replied to the thread Indesit dif04.
    Spoke to soon doesn't se.to be getting any further. The flap for the tablet hasn't opened and there is a faint electrical noise but...
  • S
    stuarta posted the thread Indesit dif04 in Appliances.
    Our Indesit has just started a problem where you can turn it on, it beeps, start to hear it filling then it stops and does nothing. If I...
  • S
    stuarta replied to the thread Composite cladding.
    Ah sorry I'm talking cladding not decking. I can see it could be done easier with decking as they are straight edgings but the cladding...
  • S
    stuarta replied to the thread Composite cladding.
    Ok so that's it, they can't be cut and you either have to find the width you need or just start and stop wherever the board finish with...
  • S
    stuarta replied to the thread Composite cladding.
    Ok sorry maybe it's me being dumb. So basically my wall is 1200mm deep and the boards are 157mm wide so I'm going to need 7.6 boards. 7...
  • S
    stuarta posted the thread Composite cladding in In the Garden.
    Hi guys, I'm contemplating installing some cladding around our outside steps which backs into a box that we use as a bench...
  • S
    stuarta replied to the thread Decking newbie.
    Yep I put them down every year and I've even taken to netting it every September to prevent them hatching. The problem is it's...
    • PXL_20240317_161906723.jpg
  • S
    stuarta posted the thread Decking newbie in In the Garden.
    So after 8 years of struggling with leather jackets, I'm now fed and thinking of decking it. The area is about 16sqm and everything...
  • S
    stuarta reacted to Chivas69's post in the thread Primer/undercoat with Thanks Thanks.
    That's good for the job if you don't mind leaving it to dry. A powder filler will be ready to sand much quicker if you want to get on.
  • S
    stuarta replied to the thread Primer/undercoat.
    Random should be B&Q https://www.trade-point.co.uk/departments/toupret-fine-finish-ready-mixed-finishing-plaster-1kg-tub/1849584_TP.prd
  • S
    stuarta replied to the thread Primer/undercoat.
    Bumps mainly and few surface cracks. Thinking something like this...
  • S
    stuarta reacted to Chivas69's post in the thread Primer/undercoat with Thanks Thanks.
    No need for primer. It's use in this instance was to take the sting out of the purple. 3 coats of main colour will be fine
  • S
    stuarta replied to the thread Primer/undercoat.
    and not worry on the primer then. Also need to try and sort some bumps out on another but that's a whole different story
  • S
    stuarta replied to the thread Primer/undercoat.
    Kinda yes but looking at it the primer should be just enough to do my 6sqm purple wall and the whole of the room is about 18sqm so might...
  • S
    stuarta replied to the thread Primer/undercoat.
    Looking at standard Dulux matt emulsion...
Back
Top