We have a green coloured toilet bowl here. This has a common style, matching colour seat and hinge. The plastic bracket, which holds the rod to the seat, has broken. I tried to glue the fracture with epoxy resin. But it did not hold.
Broken_hinge by Tobermory posted 3 Apr 2021 at 3:35 PM
So I...
Thank you for the advice, jj4091.
The door was not locking. It was latching but not locking.
So I took a chance and fitted a new door lock module, on the basis that the outlay of £20 might save the cost of a new machine.
And now have an operational machine again.
I have a ‘Bosch’ “Maxx 6” washing machine, Model (E-Nr.) number: WAE24064GB/30 FD 9412 606416.
It seems to have failed. When I try to start the machine washing nothing moves and there is no sound from the machine.
For example, if I turn the Program Selector to [40o]. Then press the “Start”...
I would like to drill a hole for a Rawplug in the side of a recess near to the top:
Annotated_image by Tobermory posted 23 Jul 2020 at 3:50 PM
I would like to drill the hole 8mm towards the interior from the edge of the white, plastic trim and 9mm from the inside of the top surface of the...
Thank you for the great advice.
I used wire wool to prepare the surface. Then metal primer on the bare patches. And a couple of coats of the Hammerite Direct To Rust Metal Paint to finish.
If that is the quiescent reading on the DVM photo it seems high to me. 480mA current drain would flatten a 75Ah capacity battery in around a week. Were any doors open (and therefore interior lights illuminated) when the measurement was taken?
I do not know if the existing paint is oil or water based. Sorry about that.
I intend to paint the frame with Hammerite Direct To Rust Metal Paint. I will be happy if this finish functions for the next five years. I painted a metal patio table and chairs with this a few years back, and it has...
I am going to repaint the door of a shower cubicle.
A lot of the existing finish has peeled from the frame. I am wondering what the easiest method would be to remove what is left of the existing paint?
Here are a couple of photos of the frame:
SD_composite by Tobermory posted 29 Apr 2020 at...