TriMattRdg's latest activity

Suspended timber floor with 22mm caper board on top and brick wall that will have a lime levelling coat , having IWI on external wall...

Thanks for responses in flow direction, on testing this morning they do seem to heat up evening within 20 minutes but I may get the...

This rad can be hung on either side , so is it not a case of just flipping over ?.

Thanks - I’m pretty sure two bars to the centre partially heated up first . I’m not a plumber but I would not have installed this way...

Direction I'd say is/should be from left to right, if you shut one valve and let the rad cool down for a ~ hour, then reopen it (boiler...

Can you elaborate please @jurassic sparkk

I had this vertical radiator professionally installed but they were not sure if they had fitted with diverter on correct side! (note...

We have had joists replace and rockwool insulation inserted and tomorrow will be putting floor covering on (22mm caper board). Some...

We are looking to insulate the bay window and have removed the old Frame that supported a seat, this has uncovered the cavity. On the...

Out of interest how have you dealt with the detail where the joists go through the wall , and the join with the wall ? -Should I look...

Thanks, going to take all the above into account . I am opting to have all the boards taken up to do this as I want to try and get...

Doing mine at the moment, using Rockwool (it's some kind of acoustic slab that I picked up cheap but it still has very good thermal...

Looks like you have a bit of wet wood/rot on the joist ends, slide in a strip DPC (as the bitumen might have failed) and repair/replace...

Heat loss through a floor is mostly by draughts. There is no convection, very little radiation, and not much through conduction. Most...

I'm getting around 30 SqM of suspended floor insulated in two weeks time. I'm torn between Steico Wood Fibre Flex 100mm or Rockwool...