Recent content by wassyy

and yes the switch is running the lights to the loft

you are correct it was a double pole switch, however in the new switch the lights are not working, i have put a meter on the wire terminals to measure the current but there is nothing comin from either of thm :oops:

No they we're not in a connection block, the black wires we're connected together to one point and the reds together to the other points...

wel the earth to the earth points, the black to the common and the red to the l1 on the switch

i will get a proper tester tommorow, there are 2 red 2 black and 2 earth wires, they all go into the loft

any more ideas guys im stuck here dont know what else to do...

the rcd did trip and i reset it after puting the new cwitch on but the lights dont turn on

i have already changed the bulbs, i checked the wires with a tester screwdiver and there is no light coming on on the tester

hey guys looking for some advice, i was changing a ceiling pul cord switch today and didnt turn of the mains :oops: bad move i know!! i magaged to touch two wires together and they made a bang sound, when i went down and checked the c/breaker it had tripped, so i went and continued to wire the...