Recent content by WillSilver

That did make me laugh, thanks for that needed cheering up. :)

Just an update was trying to get it done before we went on holiday, had the board delivered next day for £103. Took my son and myself about 30 mins to fit, everything working fine now.

Thanks, that is more like what I was expecting to be honest.

So he was about right, just a bit short at the moment. Had board changed about 5 years ago guy charged me £160 for everything was expecting an increase but not that much.

Guy came out (he was already round my daughters for a separate problem) said its the PCB just shy of £300 to supply and fit, but cant do it to next week. Thanks but no thanks. Wasnt too bad having a cold shower on the hottest day of the year, but not something I want to do on a regular basis...

The last time I was on here was 2011 reference the above boiler, nothing relating to previous problem just want to know which area I need to be looking in. Turned tap on this morning, nothing, sort of clicked, red lights flickered and first green light came on. No constant red warning lights at...

I have a problem with the above, well two problems the drum on the machine started to make a noise when turning to the point it actually stopped. It was possible to get it it working again by rotating the drum by hand but eventually even this didnt work. There was a burning smell early...

Right I have changed the diaphragm, gland nut etc. The push rod is engaging the micro switch but nothing seems to be happening after that, should i be hearing the pump working, then the gas igniting, just need to know the sequence. Is there any thing else I can try to eliminate from probable...

Appreciate what you are saying and your comments are noted, but would not know where to start. I have no experience with this type of boiler, I have changed diaphragms etc on multipoints. Dont know where to look to see if it is pushing the switch when the pump is running, all i am looking for is...

It is the standard 105e, found it now in manual, page 36 fig.67 will find part no for it shortly thanks again for your help.

Just to confirm is this the DHW Pressure Differential Valve Diaphragm part of the Diverter Valve Assembly, diaphragm part no 248066.

Yes, pressure guage is fine.

As above I get the flashing red light indicating 'fault on pump or low system pressure'. As finances are extremely tight at the moment i am just looking for an indication where the problem might lie, this has been going on for some time, i am just grateful we dont need the central heating at the...