Recent content by Wolfblass

Hi - ADT do not 'keep' manager codes- they are not written down - put in safes - or kept on record anywhere the manager code is changed by the owner or 'manager' of the property. End of. To do the changes you require maybe worthwhile contacting ADT and getting an engineer out as it involves...

If you have manager reset required, then most probably an activation either whilst the alarm was set or maybe a tamper activation - maybe you opened the control box or took a cover off a detector or siren. The way to reset it is to either enter the manager code - sometimes known as a master...

Correct. Also the 3000 seriespanel is more commonly known as a Scantronic 9100 panel. When powering up type in the code to silence, then close thr panel cover then type in the code again, this, should reset it, unless other faults exist. Or if it was amonitored alarm it may need a engineers...

Maybe be able get the Mrs to agree to a dual fuel type, i.e gas hob electric oven - but she insists it must be a double oven. Not decided on a make/model yet but most likely to be a standard 60cm type, she likes the look of the cannon range, i think these, for the dual fuel type are rated to...

I work as an Intruder Service Engineer for ADT and have done for over 14 years. Been in the trade for 20 years. The simplest way for a novice is to simply as already suggested remove the fuse from the fuse spare THEN open up the main control panel and remove both of the leads to the battery...

Hi, as the title says, I'm looking at changing my single gas oven/hob to either a dual fuel or all electric freestanding double oven/hob. There is currently no cooker ccu, so my questions are: Is 6mm t+e ok directly from the consumer unit - coming out of the 30a rated fuse connection to a...