My Programmer/stat is badged 'British Gas RC plus', talking to a Worcester Bosch 28CDi. LCD screen is knackered and I want to replace prog/stat. Looking online, I can tell it's not a Drayton Digistat +1RF. However, I can't see the difference between a +2RF and +3RF. Does the BG RC Plus equate to...
I am a spark and while testing new cabling today a wire fell out of a terminal in an underfloor heating wiring centre/control box. Have looked at some wiring plans but can't sus where it came from. Please see diagram of PCB. Thanks for your help.
I am installing a shower pump and rejigging pipework. Pump outlets are 15mm and mixer taps are 22mm. Is there any advantage in me fitting 22mm pipe over the 4m run or should I fit a 15mm run and expand it just before the mixer taps?
Hi, Alpha Ocean 240E won't fire on DHW or CH.
I have amber warning light for 'Blocked flue or fan fault' coming ON whenever I demand DHW or CH.
I'm working my way through fault finding flowchart:
Turn selector to DHW. Power light comes on? YES
Turn DHW stat to max and open DHW tap. DHW...
I have an Alpha Ocean 240E combi. Been good as gold 15 years. It's dribbling from where the plunger pops out of the DHW flow valve to operate the microswitch. Must I replace the whole valve or is there a tweak I can perform? I notice the plunger emerges from a hex-shaped head but I don't want to...
Hi Pablo,
Had a good look behind boiler and also on diagram in the manual. Can't see any sign of a pipe from the expansion vessel teeing in to the bypass pipe.
Am I missing the obvious?
Cheers.
Cheers Nath & Pablo,
I am intrigued as to why both O rings should leak simultaneously, not having done so before. It does look to be in a right fiddly place.
It appears that I could shut the flow & return valves, leave the rads full and drain only the boiler. Does that sound right or must I...
After dripping had been happening for however many days: 0 Bar.
After I topped it up this morning (cold) 1 bar (green zone).
Now that it's been running 1.5hrs and house warmed up: 1.8 to 1.9 Bar.
Ends of bypass pipe linking CH flow to return on back of boiler are held by spring clips. I have dripping from both clips. System still ran although pressure was 0 Bar. Topped up to 1 Bar and is running fine.
All rads getting hot, suggesting no blockage, so why would bypass pipe be in use...
I want to matt-emulsion my ceiling but at present it is painted with HARD gloss paint with drips in places. Been using orbital sander but it stands off the hollows and leaves them unscoured. Rubbing it down is a long, horrible job.
Have tried a heat gun at varying temperatures and distances but...