Search results

Model Number DDY062 As title says it fills and drains in a loop at 4 times and then bleeps to a stop. My research would suggest a fault with the flow sensor but i dont see it on the inlet. From the water inlet the pipe goes straight into this, which is a water softener. Does that have the flow...

......Before you say get rid of it, worst make ever etc, not an option right now So, turn the shower on and only a trickle of water comes out. Within a few seconds the shower starts to sound like a kettle boiling. Just had the thing completely apart. No lime scale at all in the heating element...

So i need to re-pressurize my boiler. Done it once before with no problems but i think i did it back up too tight. I dont want to force it too hard with the fear of breaking it. Does the black leaver come off so i can use a spanner as i just cant get enough power in my grip to open it or...

So i just fitted a velux for the first time. Once i came to relay the tiles i had to cut half tiles to go down both sides. Normal stuff i'm guessing. Problem being because of the flashing i could not hook these half side tiles on any horizonal beams (beams, rafters, bits of wood. I dont know...

......of the buildings regulations :? Its quite a number of pages long, filled with all sorts of jargon. Just looking at the table of contents makes me want to bury my head in the ground and let the worms eat my eyes out. I want to do i little loft conversion (no building, no extending...

Hi all. I'll try and ask as simply and as short as possible. a: One side of my dorma roof, maybe a quarter of it. b: insert a skylight c: insulate, stud and plasterboards the walls etc d: create a very small room, not knocking any walls down or anything. Just creating one stud wall...

Below picture is how my plumbing is set up.....pretty standard! I used to have a single sink, now i have one with a half/side sink. I cannot find anything to be able to connect the side sink to go into the (what was the dishwasher drainage (right).....i've moved the dishwasher now I...

Trying to hook up my Honeywell CM927 to my Vaillant Ecomax boiler. I hardly know how to wire a plug so bare with me! So from the receiver, left to right ive got N (Blue) going to N on the boiler L (Brown) going to L on the boiler L (Yellow & green) to earth on the boiler A (Black)...

Can somebody give me information on how this is wired. Keeping in mind i've never done this before but i'm always up for giving something a bash Honeywell told me i shouldnt do it if im not experienced but i really dont want to have to pay someone else, it cant be that hard. Cheers

Read numerous people saying the VRT340F is pants so looking for alternatives. Is the Honeywell CM927 compatible with the Ecomax? My house (purchased 6 months ago) doesnt have any roomstat at all and i want to sort it before winter kicks in Cheers