Search results

  1. rocks1

    Green flashing lights on Hotpoint Dishwasher FDW60

    Run a cleaner thou it. It's scaled up
  2. rocks1

    hotpoint futura washing machine

    Yes it's true
  3. rocks1

    HOTPOINT FF187L FRIDGE FREEZER MODULE PCB PROGRAM

    You can't programme it. Needs a smart card and reader cost £150.00. Or a company laptop from hotpoint.
  4. rocks1

    AEG Favorit Dishwasher. Help....

    Sounds like you got a leak in the base of the dishwasher. The anti flood system has kicked in. Tip it up see if water comes out of the base.
  5. rocks1

    hot point Aquarius ctd00 (moved from Forum Information)

    So is it working ok now.
  6. rocks1

    Beko Fridgefreezer (CXF5104W )

    Get a fruit shoot bottle fill it with hot water then squirt it down the hole. The reason why is the bottle is easy to handle and squeeze hot water melts and ice in there and the blast of water will clear and food waste in there and the bottle is enough not to overspill on the tray at the back.
  7. rocks1

    hot point Aquarius ctd00 (moved from Forum Information)

    Rear fan is rubbing on the metal cover. Refit fan and check rear cover not bowed
  8. rocks1

    Hotpoint BHWD129 leaving brown blobs on clothes

    Drum bearings have gone , complete welded tank cost about 120.00 for a new drum. You can 1 scrap it 2 call hotpoint who will supply and fit it for about 110.00. The choice is yours.
  9. rocks1

    Creda Dryer Reversair 37642

    Check the front pads and the lip on the front of the drum. Poss worn pads or drum lip split
  10. rocks1

    FDW60 flashing lights

    That fault code means time out draining. Check waste pipe not linked or crushed also check sink spigot.
  11. rocks1

    Old Dishwasher Stored for 1 year - will it work?

    Connect the inlet pipe to outside tap make sure you raise the waste pipe up a metre high to stop it siphoning.
  12. rocks1

    Old Dishwasher Stored for 1 year - will it work?

    Only way is to test it. Circulation pump might have seized up.
  13. rocks1

    Need a Tumble Dryer front felt seal this size

    The first part number I gave you is only 2 MM extra on the side. But 5 ft long so use that and cut some off.
  14. rocks1

    Fan Oven Screw Won't Grip

    Or drill a small hole 2 MM. Near the other hole and use the same screw all your doing is moving the screw hole a few cm.
  15. rocks1

    Need a Tumble Dryer front felt seal this size

    The front duct cones with a seal on it. But is now obserlete. You can try 2 seals one the vtd range. Coo142613 , 14 MM. Or coo276750 16 MM. That will pos be cheaper than the kit.
  16. rocks1

    Need a Tumble Dryer front felt seal this size

    C00307120 complete kit. eBay about 10 /15.00.
  17. rocks1

    Compatible Tumble to Hotpoint TDC32

    In short no. They are 10 years old now plus. The water bottle was down the bottom new ones are at the top.
  18. rocks1

    Hotpoint Aquarius WF 321 flashing lights.

    Check motor brushes worn down.
  19. rocks1

    Indesit IWDE7125 Fault Code 15

    Are you buying a genuine part or a copy. Copy parts don't last long as long as the condenser is clear and has good air flow it should be ok.
  20. rocks1

    Indesit IWDE 126 washer drier help please

    Put it on dry cycle. See if it gets warm before the error code comes up. That tests the heater. Check the black themister on the heater box. It's got 2 thin wires on it , some times they break off. You can remove the heater box and look at the condenser , that's the plastic bottle shape on the...
Back
Top