Search results

Hi Yes the powder sugar soap is the one. Hope the landlord appreciates you.

Unlike my learned friend, I apologize for not advising on the paint to use but I thought you asked about lightly keying your existing paint. Originally the green scourers were designed by 3M for use on paint in the motor trade. They did not catch on particularly well in that instance but are...

Hi Keying mouldings is best done by hand as most machines will still miss some areas. Use a green scourer that you would normally use for washing up. Do it wet with warm water and sugar soap. The scourer will give you the best flexibility to get into all the nooks and crannies plus the soap...

Hi, sanding new plaster makes it become more porous and thus it will soak up more paint. Assuming you have the desired smooth finish you require all you need to do is put more coats of paint to cover the marks and get it to look just like the rest.

Hi, I have a Hotpoint WT960 which had water ingress due to burst pipe. Thought it was dried out but obviously it wasn't as an electrical flash occurred and it became dead. When first switched on it flashed up F8 on the screen. The water supply was off at the time. Any idea's please. Thanks for...

Does not heat up the dryer. There is no error message. The condenser is chrystal clear. Water valve opens and trickles through and the fan over the condenser starts up after a minute or so. I have put in a new heating element but still no joy. Many thanks for your help Regards Skidmoor

Sorry for delay in reply, been away. A wire had come off a sensor located in the rubber pipe from drum to condenser. I had not realised though, that the water needed to be connected in order for the dryer to work. Now, since connecting it back up, the dryer works. Thank you very much for your...

Thank you for your posting. There is a digital display but no error No. comes up and the LED's do not flash. When the dryer is on the correct light comes on steadily. The model is 914601817 / 00.

Dryer does not heat up. Condenser fully cleaned and new heating element put in. The timer does not count down and the fan does not switch on. The drum goes through the motions and all other aspects work. Help please. Thanks.