Search results

  1. L

    Separate programmers for Y-plan

    I have a typical(*) Y-plan heating system with an old mechanical Danfoss 4033 programmer. I aim to replace this with a digital programmer but I want to find one that allows the desired CH temperature to be programmed into the on/off periods. I had this in a previous property with a combi...
  2. L

    Broken 6 week old Mira shower?

    I bought and fitted a Mira "Play" shower 6 weeks ago. It worked absolutely fine for this time but now does not heat water at all on any setting. Water still flows through the shower and turning the temperature gauge up high does appear to decrease the water pressure as it should be getting...
  3. L

    Earthing Kaldewei bath & taps

    I've just fitted a Kaldewei bath and am wondering where to earth it. There is a tiny lug underneath or two bigger "wings" at the head end which have plastic removable covers. Both seem to be painted slightly, so I'm not sure which to use. Also, do I need to earth all 4 taps in the room? Or is...
  4. L

    Earthing Kaldewei bath & taps

    I've just fitted a Kaldewei bath and am wondering where to earth it. There is a tiny lug underneath or two bigger "wings" at the head end which have plastic removable covers. Both seem to be painted slightly, so I'm not sure which to use. Also, do I need to earth all 4 taps in the room? Or...
  5. L

    Replacing diaphragm in diverter

    I have bought a pair of new diaphragms for my boiler. I'm hoping it will cure the problem of both CH and DHW pins being open at the same time, the CH pin seems to be "sticky" and not always notice when DHW flow is requested. I have the two new diaphragms, is this all I need to replace? Some...
  6. L

    Alpha 280E boiler problems

    I have an Alpha 280E boiler. For the last year (since I moved in) it has been a little temperamental, the DHW would cycle hot-cold every 10 seconds every so often. The heating was always fine. Over the last week it has got much worse. The boiler fires and the pump works. Radiators only...
  7. L

    Adding another light in loft

    I have a light in the loft using a simple batten holder. It has live and neutral and an unused earth (it's a plastic fitting). The live is switched and connected using 1.5mm cable from the upstairs lighting circuit. I want to add another light at the other end of the loft. I bought another...
Back
Top