Search results

I have an Impact driver, i'll go and see if any of my deep sockets fit! Cheers

Thanks guys! I have a ring spanner with a nice fit on it, but it does not want to budge! I may have to bring out the big hammer lol.

Hi all, Got a leaking tap and after a few YT vids I thought, I can fix this... Not lol. I got the top fixings off which I then thought I can just take out the cartridge and source a new one, but the cartridge (Internals) doesn't want to budge (soaked in WD40 etc). So Can this be repaired and...

Success! Came out just like you said, thank you! And as i thought the pipe was completely disconnected because it was not secured on just pushed on with no sealant. also, they used a 3 meter hose for 12" of travel that was needed lol, bloody Barratt's!

Thanks, I thought that would be the way, but wanted some advice before i broke something, that's kinda the way things go for me lol. Thanks again, will attempt this later and hopefully where the pipe connects to the flu has just come loose.

Yes I think it will, there seems movement it it, but was a bit scared lol incase I lost anything in the void.

Hope that worked?

Hmm, that’s odd, I did that and change the 0 to 1 at the end of the url, that’s what I have always done for the images to show as link comes from my Dropbox. I can see the images on my phone and browser. Maybe I can add as an attachment as a pdf?

3 pics are in the thread, they show up fine for me? Is there another way to show them?

Hi guys! Background: So our whirlpool Extractor fan (extract to outside) seems to be extracting into the wall cavities and the smell is coming into the upstairs bathroom instead of going outside. I have had a look down the rectangle pipe from outside and all seems well, so i am assuming...

Thank you so much Muggles These look perfect! Yep I know what you mean about downgrading, if the old system did not fail so often I would not have changed, it's an odd layout here but these will be fine to balance out some rooms

I will do later it's basically what you are left with is a pin which is sprung, up open and compressed closed.

Hi guys, My old system had Honeywell HR80UK CM Zone RF TRV on every radiator (22). I know know have Hive and don’t need the HR80UK’s but want to replace them with manual ones. As the existing valve is the push down type (sorry don’t know the name) is there an adaptor I can get to put a cheap...

Sorry for the late reply, well it turned out the valve on the zone valve was leaking and killed the switch on it, but as the 2 zone valves were wired together to bypass the zones (long story). But I bit the bullet and had Hive installed which is working great now

Happy New year guys, Typically over Christmas, the heating started playing up. So was hoping for a little help locating the issue would be so welcomed as it's driving me crazy. This will be a long post, but I'd rather try and tell you everything I have issues within the beginning :) So my set...

Thanks Ian, Glad o know it will do the job!

Hi all, after some advice on building a small wall/retaining wall. here is the garden i did 7 years ago now and the wood has just gone rotten, even the posts :( As you can see, i need to do this properly. I lay foundations and build a wall, but i don't particulary like the look of all...

Thanks Endecopt, Should i be seeing lots of Aphids then? as i can't see one of them?