Search results

hi thanks to all who replied although the shower failed after 18 months i never really did anything about it untill a good 6 months later. (we have 2 showers in house so i was just being lazy ) i appreciate your awnsers but could somebody tell me what mira model is deemed reliable as i have...

Hi all. I have a Mira sport 9.5 electric shower but its failed . Not overly impressed as it cost the best part of £300 plus vat And barley lasted 18 months. I know want to bite bullit and replace it . Thing is I went on amazon and the new Mira sport 10.8 gets Slated and after calling a...

hi i have a problem where my sanyo microwave has develpoed a fault where it acts normally but just dosent heat.any ideas would be appreciated

hi i have just installed a large galvanised gate and i am panneling all uprights with 75mm cedar plate strips. i would like to protect iit so as it kept its original characteristics.any advice on what product would be greatly appreciated.

tried changing it from "just scan" to "16:9" seems ok but i am not sure if it will cause other issues as i am sure "16:9" was causing me issues top and bottom and that was made me use "just scan" in the first place.thanks for help and i will keep you posted on any further issue. thanks again 9tjc

yep it certainly is, can you help?

hi all i have a samsung 50"plasma which is approx 2years old but in the last week has started showing approx 10mm blue lines each side of my picture.any help would be appreciated as the tv is under the 5 year gaurantee from john lewis.

hi i have an indesit dif 16 uk dishwasher and when it is working and of finished i am getting a horrible smell whiuch i can not get to the bottom off.when i take the kick plate off along the front of the sink unit/dishwasher i can not smell anything untoward but upon opening the cupboard door...

thanks for reply.so are you sating i can use an 18 volt battery in an 14.4volt tool?and if so will it cause any damage?i have not checked the a/h that the tool needs.regards trevor and cheers for reply

hi all i only have 18 volt gear but i have had had to buy a 14.4 volt dewalt tool.my questions are 1 do i have to buy a 14.4v battery or can i use my 18 volt batterys in the 14.4volt tool or 2 if i do need a new battery will i also need a new charger or can i use an 18volt battery charger for a...

hi it is a worcester bosch 42cdi condensating boiler. regards trevor

hi all i am in the midst of putting an attic conversion in but w0uld like a very very powerfull shower of some description fitted but due to changing to a condensating boiler on the ground floor i would really appreciate any advice you guys could give to achieve a mega pwerful shower.regards trevor

hi cut to the chase. i have an outside light which is corroded and now useless due to the fact my plumber fitted a boiler with the flu blowing hot damp air over the security lamp rendering it useless. can i cut the 3 core cable where it comes out the wall and join another 2 3 cores and then...

hi all thanks for replys.unfortunatley due to my lack of technical experience i will probably look to buy a new laptop.on the off chance if anybody knows of a laptop icould buy that would take the same battery as my hp nc6320 it would be appreciated if you could let me know as i could have a...

hi dave,thanks for quick respons. laptop was plugged in at the and the wife reckoned there was as few sparks so i presume the 3 wires probably touched each other.i know nothing about laptop,pc`s so youre advice is realy appreciated.if mother board is damaged does that mean i need to buy a new...

hi i have a hp nc6320 laptop which worked fine untill my dog chewed the power lead. i bought a new one but laptop still shows flat battery.i have tested power adapter and i am betting the correct 18.5v ant 3.5a at jack plug but still nothing when you hit the power button.i have tried leaving...

just had a push button cistern fitted. button is around 20cm from to central if cistern so plastic pipe is fairly short but still u need to really give it a good push and i mean a good hard push.wife and other females even struggle to push it.kids have to take a good few attemps, any ideas how...

had a dc01 for 10 years (no problems not even a belt) had a dc04 for round 5 years (not perfect but still very good) my hand held will probably be something stupid so will persevere THE REASON PEOPLE THROW DYSON`S AWAY IS BECAUSE THEY DON`T THINK TO LOOK FOR A PROBLEM (I DO ADMIT THAT DYSON`S...

hi all i have a handheld dyson which is only been used a few times over the past year(ish) all of a sudden it has refused to work left on charge for around 6 hours and all lights working fine but still refuses to switch on. wife did mention last week that she did`nt think it was as powerful...

(never used that kit it myself) did you just say ("never used that ki it myself")? lol`s