Search results

Cheers Richard , Thought that it may need inspecting and certifying , i will have to go down that route and get it done properly . Many thanks Ady :)

Hi ,I have a wood burner that has a 8 in solid flue going in to the chimney . i have to put a flexi flue down the chimney , Could anyone tell me please , can reduce the flue size to a 4 in one in the chimney or do i have to keep it the same as what comes from the wood burner !!! Didn't...

thanks john, i will be getting a tester tommorrow and get them fitted cheers mate Ady

Touch wood , i haven't had any problems with it , so what are the problems you and others have had ? but will go to local dealer to get diagram , thanks Ady

Hi , does any one know what colour the wires are for transit connect reversing lights as want to fit reversing buzzers and don't know which wire to connect to . regards

thanks guys , its been a help !! didn't think to look on ebay , but might well go down that route . Big_spock sorry didn't answer but yes it is metal-bodied camera .

hi ive had a couple of quotes but they are nearly as much as i paid for the camera .

Hi can anyone tell me a good repair site or shop to have my olympus fe360 digital camera repaired as i sat on it and broke the lcd screen . can anyone advise me :)

hello , can anyone help with this one ?? i sat on my digital camera and have broken the lcd screen . anyone know where a good place to send them to get repaired !!!!!. its a olympus FE-360.

Hi, i would after using the paint stripper , make sure you clean it down with damp sponge or similar , then you can apply some grate polish(black) with a cheap brush, leave it for 30 mins and then polish it of with a cloth . make sure you have the fire place either in situ or on an old...

thanks for the replies so in a nut shell i can cut them and not cause a problem if and only if i cut the wires one at a time so not to cause a short with the cutters . if that make sense . thanks

yes you could do , but i would go to local timber merchant and see what they have ,and then see if they have a list off chippies they recommend and see if one can fit you one , personally i would just get one to cover maybe 6 ins wide . if not somewhere they cut timber to size , and...

thanks Flame port is there a way around moving this master socket from bedroom to another room by going out side ??

If you aren't taking the flooring through into the lower room , you could get a hardwood threshold as wide as the door frame (usually 4 or 5 inches wide )and the length of the opening (2ft 6in, usually) and have a 10mm rebate put on bottom edge of the length of the piece of wood and the tuck...

If you aren't taking the flooring through into the lower room , you could get a hardwood threshold as wide as the door frame (usually 4 or 5 inches wide )and the length of the opening (2ft 6in, usually) and have a 10mm rebate put on bottom edge of the length of the piece of wood and the tuck...

hello can some one (hopefully ex BT worker ) answer this !!!!!!!!! can i cut the incoming BT cable ,were it is fixed to the brick work outside and comes from the pole , and put in a jointing box ,then run new cable to master socket ??? And is the incoming line fused at the exchange at all...