Search results

Unvented

Customer wants an UNvented cylinder in place of existing vented. Currently has a dragon RF cylinder stat. No easy way to hard wire the new dual stat supplied with the cylinder. Is a dual RF thermostat available ? Cheers.

randomly tripping even with all appliances unplugged

have a poss faulty one of these and seem quite rare to buy is there a better quality brand direct replacement available http://www.harbordelectrical.co.uk/images/source/Fuses_Breakers/Proteus/Proteus_RCD_100-2-30_100A_30mA_-1.jpg

need french doors fitting, brother and law does this for a living and has let me down badly. dont like the quotes i have been getting so thinking about diy . cutting down existing window which is not a prob. what do i use to close the cavity and what is the exact position for the...

are building regs online anwhere so i can see what regulation 4.4 is ?

submitted my drawings and finally heard from the LA yesterday few things to add to ammended drawings and i need some assistance again. this is verbatim from the letter 1. Fire. confirm method of closing cavity 2 . Environment . show position of vertical and horizontal damp...

because the nearest one is 30 odd miles from me :shock:

need to replace a bit of cast down pipe(rainwater) where can i buy this other than drainage center i assume the sizes 65mm and 75mm are od sizes

existing window getting cut down for french door so lintel ok being fitted my brother in law who does it for a living. existing cavity wall is 300mm thanks for your help

i need o brick up my existing kitchen door to the outside and install french doors in the living room. spoke to council and they say i need a building warrant . i have done the drawings and they say the drawings are ok but i need o write on them the method of how the door will be bricked...

need to get an approx cost for a 6m x 7m garage floor. what the current approx price for a cubic meter of ready mixed ?

i would if it was on the ground floor

do you have a pic. i hate asking for stuff that i dont know what it looks like.

many thanks i'll get on the case tomorrow

excellent , never new cast ones existed. will plumbs, pts etc have in stock do you think or will i need to order ?

what the best method to do the above ?

m8 phones me at work today . tells me he's just phoned the bco and told them what the plan was. apparently he said just to carry on , dont need a warrant or anytthing i assume this is not the norm would i be better phoning myself ?

my m8 is contacting building control its his house. i have only dug it out to make sure it was possible. no other work is happening till its ok'd. just need to know what i'm doing. thanks for your reply

excavated the clay waste pipe today and a trench to the edge of the house. fall is fine so thats good. can someone confirm that i can simply tee into this ? is it ok with the tee on the horizontal or can i have the tee pointing vertical so the waste enters from the top. any help...